A record player is an apparatus for reproducing sounds from a phonograph record disc that is being spun by the turntable at a constant speed. The sound is reproduced by the vibrations picked up by the stylus or needle in the grooves of the vinyl. These vibrations are converted into electric currents and amplified for the loudspeakers to reproduce the sounds.
Their parts are needed to be changed regularly because they will wear out by constantly using them. This is true specially for record player needles due to the friction made when it runs along the grooves. The following are some of the best ways in taking advantage of your phonograph and having it produces quality sound.
The set up of the player will require you to have a speaker and an amplifier but there are available speakers where an amplifier is already built inside them so you could just instead use them. Speakers must be positioned according to the indicated sides and enough space between the speakers and wall. When placed on hard surface, have them sit on a foam and let it absorb the vibrations.
Buying second hand vinyl records are better due to them being cheaper compared to brand new specially those in vintage markets, garage sales and charity shops. Clean thoroughly your records for the greatest sounding music to be possible when being played. Cleaning machines are available but cheaper alternatives are also available.
When not using the player, the dust cover must be down in keeping it clean. Though when it is being used, you have the option to keep it down or take it off and would depend on your preference. The sound may resonate with the dust cover when it is down so there are differences in sound quality compared to when taken off.
The platter mat is a material shaped like a disc that sits between the vinyl and player usually made of felt. It absorbs vibrations and steadily holds the record to improve sound quality. Felt is the most common material because it is the one usually included but cork and rubber tend to reduce vibrations better and cause less static.
The cartridge houses the needle and is replaceable because dust and debris can wear the needle down. If playing records regularly, annually changing the cartridge is advisable to keep its excellence in producing sounds. You may also consider upgrading for further improvements rather than just doing regular replacing.
The tracking force is the weight the cartridge has set on the vinyl which could be changed by the counterweight at the end of tonearm being turned. Guidelines are available online or included in the product with suggested tracking force of the cartridge. Too heavy weight would make the music dull while too light would make it thin.
Make sure there is enough space for you to place your player because they are usually bulky. It is important also to place them somewhere that will produce lesser vibrations. If not then it could make the needle skip and jump when playing.
Their parts are needed to be changed regularly because they will wear out by constantly using them. This is true specially for record player needles due to the friction made when it runs along the grooves. The following are some of the best ways in taking advantage of your phonograph and having it produces quality sound.
The set up of the player will require you to have a speaker and an amplifier but there are available speakers where an amplifier is already built inside them so you could just instead use them. Speakers must be positioned according to the indicated sides and enough space between the speakers and wall. When placed on hard surface, have them sit on a foam and let it absorb the vibrations.
Buying second hand vinyl records are better due to them being cheaper compared to brand new specially those in vintage markets, garage sales and charity shops. Clean thoroughly your records for the greatest sounding music to be possible when being played. Cleaning machines are available but cheaper alternatives are also available.
When not using the player, the dust cover must be down in keeping it clean. Though when it is being used, you have the option to keep it down or take it off and would depend on your preference. The sound may resonate with the dust cover when it is down so there are differences in sound quality compared to when taken off.
The platter mat is a material shaped like a disc that sits between the vinyl and player usually made of felt. It absorbs vibrations and steadily holds the record to improve sound quality. Felt is the most common material because it is the one usually included but cork and rubber tend to reduce vibrations better and cause less static.
The cartridge houses the needle and is replaceable because dust and debris can wear the needle down. If playing records regularly, annually changing the cartridge is advisable to keep its excellence in producing sounds. You may also consider upgrading for further improvements rather than just doing regular replacing.
The tracking force is the weight the cartridge has set on the vinyl which could be changed by the counterweight at the end of tonearm being turned. Guidelines are available online or included in the product with suggested tracking force of the cartridge. Too heavy weight would make the music dull while too light would make it thin.
Make sure there is enough space for you to place your player because they are usually bulky. It is important also to place them somewhere that will produce lesser vibrations. If not then it could make the needle skip and jump when playing.
About the Author:
Get a summary of the things to keep in mind when picking a supplier of record player needles and more information about a reputable supplier at http://www.needlefinder.net now.
ليست هناك تعليقات:
إرسال تعليق